shape of cylinder.

 

This topic contains 4 replies, has 3 voices, and was last updated by  rinku 2 years, 8 months ago.

  • Author
    Posts
  • #3123

    leela kishore
    Participant
    Points: 75

    why we use only circular shape for cylinder, why don’t we use square or rectanular shape’s?

    #3124

    Surjeet Sankararaj
    Keymaster
    Points: 627

    If we use square or rectangular profile, the resulting geometry is called prism.

    #3125

    leela kishore
    Participant
    Points: 75

    if we use square or rectangular shape, is efficiency of engine changes?

    #3141

    Surjeet Sankararaj
    Keymaster
    Points: 627

    If square or rectangular shape is used, heat dissipation will not be uniform in all lateral directions. This will create thermal stresses which would adversely affect the life and performance of the engine.

    #3256

    rinku
    Participant
    Points: 45

    if we use square shape combustion chamber then wear on wall of combustion chamber will not uniform, due to this sealing is effected and efficiency is low. circular hole easy to cut compare to square and rectangular shape hole,it effect productivity

You must be logged in to reply to this topic.